View full version: Wind
  1. Anyone with a Breezy 5.5?
  2. Fin angle? Increase the performance!
  3. Sq ft for tail
  4. Fibreglass blades
  5. Gentle Giants in Iowa
  6. 120 PMA Wind Turbine
  7. making sure I got it?
  8. Wire size down tower
  9. guy wire footprint
  10. Designing a blade for a generator
  11. Blade Carving
  12. Test coil voltage
  13. anemometer distance from blades
  14. pipe costs for towers
  15. Rust never sleeps
  16. Paul Gipe Spreadsheet Question
  17. Magnet wire 240 C
  18. Stator coil wire size/turns for 10' ?
  19. Realized I don't have a feel for this.
  20. Improving axial flux alternator reliability?
  21. 10' smoked in high wind
  22. crane tips ove when lifting turbine blades
  23. HAWT or VAWT?
  24. Freak storm damage control.
  25. Tower Anchors Revisited
  26. More wind,dead battery.
  27. stator mold
  28. Camper power inverter questions for wind power.
  29. 10ft machine offset error
  30. Help with design spec
  31. blades for a 1/2 hp GE ECM
  32. Affect of electric welding on Steel Rotors fitted with Neo Magnets
  33. Extruded PVC blades
  34. Fabricating an Arced Neo
  35. Charging a 12 volt 125 AH battery
  36. a cheap solution for RPM?
  37. one square inch 100-150 watt
  38. Use 1/2 or 3/4 Inch Round Magnets
  39. caulking used for molds
  40. Volts/Coil
  41. Good test run this weekend
  42. Looking for DavidPV
  43. Coil need opinion
  44. Motor Generator
  45. Grid tie Inverter.
  46. question: best mount for a pma
  47. Charge Controllers for dummies
  48. How much concrete for the guy anchors?
  49. coil to number of poles
  50. 12V curent load