View full version: Wind
  1. Report KD 377 reviewed
  2. Wind Turbine Upgrade - 7.5 HP Conversion
  3. Historical rarities !
  4. LG Direct drive motors ( similar to F&P )
  5. Blades 3.0 suggestions
  6. The crappy eBay 400w turbine...revisited and modified...
  7. Fall Maintenance
  8. My DIY wind turbine running 20mph + winds
  9. Regulator for 12 volt dc windgen to lifepo4
  10. Multiple wind turbines linked
  11. Help needed in HAWT design
  12. Magnus Effect
  13. 'Making Wind Turbines, 3.7m diameter', Book.
  14. generators: ideal target rpm for target voltage
  15. Clipping
  16. It's possible to use?
  17. airfoil chord length for 6 bladed 2x3m VAWT turbine
  18. Manual furling for 13 foot turbine
  19. Sequence of KD-reports for self-study
  20. VAWT Prototypes
  21. Mini CNC Blades
  22. Storm Yesterday
  23. Report KD 733 about the VIRYA-3.9 and VIRYA-3.9B3 available
  24. Ideal hub dynamo
  25. Report KD 732 about the VIRYA-14 available
  26. blade balancing with wheel weights?
  27. Flat-wire stator (from conductor sheet material)
  28. Use of an asynchronous motor as generator for a wind turbine (Part II)
  29. Axial flux generator
  30. Can you use an AC water heater element with a DC circuit?
  31. Why use "lifting" airfoils with turbine blades?
  32. New Tower Build
  33. Power furling - shut down
  34. Load bank tweak
  35. Low THD split phase 240/120v high wattage inverters?
  36. Long tine wind turbine results??
  37. isolating and rectifying the individual phases...?
  38. Suggestions for VAWT rough dimensions
  39. Generator efficiency at cut in speed.
  40. PV & Wind log data
  41. water heater powered directly from wind turbine
  42. Some thoughts on load control of a wind turbine, feed forward or feedback ?
  43. The selforientating moment
  44. cheap source for large motors?
  45. Use of an asynchronous motor as generator for a wind turbine
  46. Big modern S rotor
  47. My experience so far.
  48. report KD 703 about a 4-buckets Savonious rotor available
  49. Testing the new experimental wind turbine
  50. I want to build an automatic three phase brake