View full version: Wind
  1. Diodes Vs. Bridge Rectifiers
  2. Why is this fuse blowing?
  3. And I'm also turning a washing machine into a wind turbine
  4. Savonius Rotor Gap Ratio
  5. Two Bergey 10,000 Watt Wind Turbines sold for $1.00 each...
  6. Ducted Wind Turbine 'Breaking' Betz Limit?
  7. Would this be possible? (dual F&P stator idea)
  8. Please help me to make my windmill furl
  9. 3 horsepower 3-phase induction motor conversion
  10. Please discuss stalling and adding resistance to the line.
  11. 24V to 220V TO HEAT WATER
  12. PMA any good for project?
  13. Anyone using windmill towers?
  14. Designing, Building and Testing a Darivonius VAWT
  15. PVC OR ALUMINUM BLADES
  16. Scored a 3-phase permanent magnet motor!
  17. higher voltage turbine + lower voltage bat bank = brake. Why?
  18. data logging
  19. 3rd party testing of Windspire VAWT peak cp 0.2
  20. Has anyone ever tried this.........
  21. Most Do or Don’t
  22. Epoxy
  23. Report KD 699 about the VIRYA-4.4 available
  24. Stainless Steel Rods and Nuts/washers
  25. All Aluminum Everything
  26. Catalogue of Aerodynamic Characteristics, report R-443-D
  27. Report KD 698 aboout Gö 227 airfoil available
  28. Note: Comparing starting torques of constant chord and tapered blades, available
  29. Maximum potential output?
  30. Prop-to-Alternator Mis-Match, an Extreme Case
  31. 3rd party testing of Archimedian spiral wind turbine shows Cp of 0.29 for 1m
  32. report KD 696 about wind tunnel measurements on the CWD 2740 rotor available
  33. 500 watt eBay wind turbine!
  34. 400 Watt eBay Vertical Wind Turbine
  35. Ebay hoverboard motor 30$ 10Turn, 5 in hand to 50 Turn alt 5W at 12V 40 rpm
  36. Report KD 693 about the VIRYA-3.5 for water pumping available
  37. Inexpensive tower material
  38. Rating your wind turbine's peak output at 120mph is a new one for me
  39. Bulgarian wind turbines?
  40. Is the Savonius another arrangement of the Tesla Turbine ?
  41. AirX rewire
  42. Axial Flux turbine at 10,000' with Clipper and Classic - setup questions
  43. I would like to build a Jacobs tower
  44. Strange blades...anyone seen this before?
  45. Report KD 690 about 4-pole PM-generator available
  46. Overcoming high starting torque
  47. What are the symptoms of a tail being the wrong size?
  48. Non-Traditional Blade Shape
  49. 'My' VAWT (Vertical Axis)
  50. eBay "800/600W LCD Wind Solar Hybrid Charge Controller"...what's on the inside?!