View full version: Wind
  1. Frequency to RPM conversion factor
  2. dc permant mag motor questions
  3. blade progress (lots of pics)
  4. 400w ferrite magnets wind generator
  5. Got 3 - 24v Air 403's free but my system is 12v, can it work?
  6. Large thoughts - Small Wind Project
  7. Using Caps on a Wind Genny
  8. question about pvc blades
  9. help building larger wind turbine 10kw
  10. how many feet...
  11. Turbine Left Tower
  12. MOVED: Wind power and kinetic sculpture
  13. MREA Energy Fair - Great time
  14. Tower stub length?
  15. Dan Blade vs 222 for garbogen
  16. Guy rope choice
  17. Will this tilt tower design work?
  18. My 17' Turbine
  19. tall tilt up lattice tower
  20. another blade question
  21. winch cable attachment point question
  22. Wind Workshop, Buckville CO, May 2011
  23. Newbie finally up and spinning. Thanks for help.
  24. MOVED: Hello from UK alternative energy newbie
  25. Wisconsin 2011 part 2
  26. New 16' 48 volt complete
  27. Heavy blades = Heavy tail?
  28. expert opinion
  29. Wisconsin 2011 part 1
  30. minimum magnet rotor thickness
  31. blade advice
  32. MOVED: magnetically levitated 55 gallon barrel split savonius wind turbine
  33. VAWT, fun on Saturday June 4 2011
  34. SWP AIR 403 wires
  35. my 9.5' geared turbine.
  36. Tower Wire Type
  37. my first PMA design
  38. help required
  39. Neodymium slip ring thoughts/idea
  40. Best caulk for mold with vinyl resin?
  41. furling question.
  42. Do I need guy wires?
  43. Whisper 200 problem
  44. Group Alternator Design/Build Project?
  45. Utility Pole cost
  46. Wind Water Pumping in Afghanistan - video
  47. question on blade angles
  48. ARE towers
  49. Blade comparison with data
  50. windblue 512 stator in a windblue 540 pma