View full version: Wind
  1. low winds
  2. Aluminum cast stator magnet retainer, Pro's n Con's ?
  3. Atempt to getting a better idea on flux and force field
  4. Magnet to coil ratio,is it critical?
  5. Just another 10 footer, figured I would share a few pics
  6. anchor failure
  7. Aeropower 1500?
  8. Newbie Questions
  9. Removing a stuck bearing
  10. "sheerwind"
  11. Ft/Lbs. Of Torque To Bolts For Wincharger Tower?
  12. 7 mw PM turbine
  13. Wire size and charge controller
  14. Axial Flux HELP!
  15. Axial Flux 3 Phase Delta / Wye Wiring (Rectified)
  16. 0.75kw engine to generator convertion. SEIMEC
  17. Wind Energy Regulations CALGARY Monday, May 6 - 12:00 to 6:00 pm Municipal Build
  18. !6 kw induction motor
  19. Magnetic Saturation?
  20. Will this work?
  21. Where to find a 10' blade to restore a wincharger
  22. 30m tower in tas
  23. ART Turbine Peak V to 3ph RMS V??? Help
  24. restore winchargers
  25. Large (?) Wind genrator
  26. Genny using Hard Drive magnets
  27. output figures for DIY turbine.
  28. Prototype Windmill Power curve
  29. axial flux permanent magnet generator .....
  30. Where to find in Calgary fiberglass cloth,epoxi glue,resin for a wind generato
  31. upside down wind turbine?
  32. Brake switch. resistance loads etc.
  33. I would like to build a wind generator
  34. Generator made out of a 'cheap' AC motor (wound field induction motor)
  35. Wind Turbine Project
  36. best piggot size for high winds
  37. Vintage Jacobs and Winchargers for sale
  38. Yard Art...YES. Battery Charger....we'll see.
  39. its been awhile..but i have more questions.
  40. Direct loads
  41. Crazy Furling behaviour
  42. calm and missing values of wind speed
  43. Controllers and load diverters
  44. Wind Turbine
  45. wind speed,directional meter for tower
  46. rectification with stud mount diodes
  47. 10m giving 50kw, ?
  48. magnets
  49. the Art of the VAWmT: using ceiling fan alternators
  50. Voltage doubler questions