View full version: User Diaries
  1. My current blade design
  2. wind shute turbine update
  3. Testing, testing 1 - 2 - 3!
  4. Solar tracking
  5. Jerrys first dual rotor.
  6. My continuing evolution of turbine blades
  7. GM-90 owners manual and parts list
  8. Forever Dynamo Flashlight - GENNY!
  9. GM-90 owners manual and parts list
  10. Cheap 12V fluorescent lights
  11. WVO Burner (two burner model) Update
  12. Solar Generator Project
  13. Heavy Iron
  14. Whete to find shunt regulator schematics???
  15. Farm Visit
  16. Sears Wind Machine
  17. Solar panel.
  18. Solar Tracker.
  19. saw blade mill and old maytag
  20. Charting NOAA data
  21. Update on the update
  22. made pvc blades & stress tested
  23. Update
  24. exciting times !
  25. mozilla {web browser}
  26. First induction conversion
  27. motor conversion
  28. Bar magnet rotor done.
  29. Prop Comparison on Ametek 40v
  30. The Overdrive
  31. Microwave magnet generator
  32. scope images, some maint on #1, work on #2
  33. NEW TO OTHERPOWER
  34. dunlite recovery adventures & booster schematic
  35. Update on waste oil burner, two can model
  36. F&P mods.
  37. 5.5 hp conversion update
  38. off for a few days
  39. success ! boost convertor works
  40. Gotta get Movin'!
  41. new....
  42. 7"sawblade alt
  43. Wind test ECM
  44. first test with a coil and magnets
  45. machined shaft and housing, pressed on rotor
  46. For Jacquesm
  47. machining the flats on the rotor, terrible goof
  48. start of machine #2
  49. Dunlite governor
  50. First carved blades