View full version: Wind
  1. Actual Logged data and Graphs 12ft machine
  2. Suburban and Urban A/E Systems...
  3. ECM 1/2 inch shaft to 1 1/4" collar
  4. 35 foot tilt up tower design
  5. 11 footer, round 2in magnets, need coil help
  6. stall controlled downwind?
  7. turbulance
  8. new blade test with PM treadmill motor
  9. Wind turbine stator coils question
  10. Tower Construction
  11. A bit wary about shorting out
  12. china neo mag update
  13. The importance of steel around the magnet?
  14. Blade design thread- The payoff & thanks!
  15. Need a winch for my turbine
  16. Skystream 3.7
  17. Dakar ~ should be interesting
  18. Rho calculation adjustment for altitude
  19. ametek blades
  20. Frustration has set in...new install
  21. Changing voltage of 12' Home Brew?
  22. My turbine power wall
  23. Generator completed but hard to turn...
  24. dump load
  25. UK wind worry
  26. walp DIY 3.49m wind power generator project
  27. 10' turbine Rectifier help?
  28. Countersunk holes in magnets
  29. 12' Turbine install
  30. Cooling loop in a winding.
  31. Newbie, new windmill (Satillite Dish) design
  32. Thickness and number of windings for 12 or 24 volt 17 foot wind turbines?
  33. Up and running, turbulence question
  34. Any discussion of using hydraulics to power PMG's
  35. Tower for 20 footer
  36. 20 foot, Grid Tie PMG, no batteries, maybe found the answer.
  37. Ghurd has good idea.
  38. Question for GHurd , new ECM
  39. Wind to Heat
  40. angle grinder reductuon gear
  41. MOVED: MPPT for commercial wind turbines
  42. Micro Turbine
  43. Air Conditoner Disconnects
  44. Two Days of Relentless Wind
  45. Need some help to choose right cut in parameters
  46. Humming noise at cut in
  47. Rooftop wind doesnt work
  48. MOVED: Anhui Hummer Wind Turbine - Fraud Specifications
  49. modified micro wind turbine
  50. Noise level numbers Piggott design