View full version: Wind
  1. Ed - Single phase 3 coils per magnet experimented ?
  2. Calculate power from windmill on DMM readings?
  3. Coil Placement
  4. still collecting stuff
  5. Can someone recommend a replacment diode ?
  6. 2 blades compaired.
  7. 100 MPH wind storm in Oregon.
  8. Magnet Sources
  9. 3 phase drawing
  10. wind turbine
  11. magnets with 3/16 holes pin to rotors?
  12. Wind Turbines from China
  13. Winding design for 12VDC three phase, on a 17 footer
  14. 4 FT blades, some wind test.
  15. Jerry blades take to the sky.
  16. SW-403 mods underway.
  17. blades for ametek 30s
  18. question about 403s
  19. Lost web page
  20. Speaking of SW-403/AIR-X 403.
  21. Homebrew 10' Up and Running
  22. 90 Volt DC Motor
  23. Direction of coil windings
  24. Furling System Quick Question
  25. Epoxy not that much more than Vinyl Ester
  26. magnet steel collar
  27. air 400 x
  28. Wind Generator Science Project Kits
  29. Who had the blades??
  30. Can I put Iron in the coils ?
  31. ? for Dan B & Ed @ Wind Stuff or Hugh.
  32. Results improving, but is it enough?
  33. How-to for ceiling fan motor conversion
  34. bicycle anemometers
  35. Roof-mount Direct heat NEWBIE
  36. Alternator testing
  37. I'm in!
  38. Tower Materials
  39. purchasing windmill blades
  40. End bell needed
  41. Building a 6" mini daul rotor.
  42. Multi-Blade props
  43. Optimum Motor Conversion
  44. Is this suitable for a generator?
  45. Portable Wind Turbine Project
  46. Questions on furling designs
  47. Stepper Motor
  48. Diferent voltages from 3 phases combo.
  49. Thanks to all of you who have proven this to work
  50. Building Permit?