View full version: Wind
  1. Another new 12 foot diameter turbine
  2. stator with lamination sheets
  3. Loading?
  4. Christmas Eve Winds
  5. Attributes of combined wire
  6. Magnets arranged in a circle vs radial pattern ?
  7. wind/solar powered semi truck concept
  8. iSTA-BREEZE I-1500
  9. My Website for Wind Turbines
  10. First build
  11. Voltage generation in a coil
  12. Reducing cost of magnet wire
  13. Recovering magnet wires?!?
  14. "700 watt" eBay wind turbine
  15. 13' Induction Motor Conversion
  16. wire straightner?!?
  17. question about load and ease of spin
  18. Caps
  19. Help needed with stator rewinding of 36pole LG smartdrive motors.
  20. Baby Blue Motor Conversion
  21. Report KD 708 about a 22-pole PM-generator available
  22. Report KD 707 about the generator TGET380-10KW-1200R available
  23. Resistance of materials?
  24. WindTAC controller - practical experiences wanted
  25. Testing a three phase rectifier
  26. Magnet Density?!
  27. bobbin building......
  28. Clockwise or Counterclockwise
  29. Report KD 705 about the generator TGET320-1KW-350R available
  30. Hoverboard motors!
  31. report KD 702 about the VIRYA-0.54 rotor available
  32. Can you run two rectifiers on one turbine?
  33. Using a micro solar grid tie inverter with wind turbines
  34. Samsung direct drive motor
  35. Maximum efficiency of an axial flux PMA?
  36. Tornado Viewed from Underneath
  37. Coil alignment
  38. Wind Generator with Hard Drive Magnets
  39. Magnet orientation based on topology
  40. Hoverboard motor output questions
  41. Low Speed PM Alternators
  42. scrounged parts
  43. Servicing 3off Hugh Piggott design 3.7m, 12ft diameter Wind Tturbines
  44. Energy Pole by G Labs
  45. Bryan's Wind Genny about to turn again
  46. 400w eBay turbine #2
  47. New Blades for Spirit of Zubbly
  48. Help with a hybrid powered security light pole thing!
  49. Anyone dealt with "Hurricane" wind turbines?
  50. Rectifier vs diodes