View full version: Wind
  1. oem wind power
  2. How big a mill can my tower hold?
  3. smaller neodymium magnets
  4. modify dc radial winding
  5. BROKEN
  6. Rutland 913 stripped down - bearing replacement video.
  7. New wind generator flying. "Big 5"
  8. Galvanized 4" Pipe Tower
  9. Connecting Multiple Ginnys
  10. Stator thickness on new design ??
  11. Square vs Round Tubing Tower Construction
  12. 24 volt wind turbine set up
  13. Fiberglassing blades
  14. 17 ft machine furling
  15. Blade balancing question
  16. Aurora GTI residual current and setting questions
  17. Bicycle hub motor as wind generator?
  18. GOE222 /table saw??
  19. Coastal Wind Characteristics
  20. Some advise about a new build please
  21. One single blade ?
  22. ametek 38vdc wind turbine (modified)
  23. MOVED: big turbine on fire
  24. Variable Pitch Hub
  25. would this make an acceptable generator head for a wind turbine?
  26. MOVED: Please explaine 3 phase to dc, I'm lost
  27. simplex mill
  28. Next project well underway.
  29. lightning strike
  30. SW 403 48v back up
  31. Blade root length
  32. VAWT, PMA, stacked stators and rotors
  33. serviced turbine back up and running.
  34. Oops - gone all bendy!!
  35. Anemometer Tower
  36. Maximum blade speed
  37. two types of single phase
  38. An operational VAWT for rural electrification
  39. Relay tied to the grid for easy high amp transfer
  40. Inspeed anemometer kit. anyone use one?
  41. How to size the propeller based on generator specs
  42. Longevity
  43. Ametek Shaft Adapter Removal?
  44. Had some wind today, got good test #s.
  45. Superhydrophobic
  46. Rewinding a Proven stator? Hugh?
  47. machining epoxy
  48. small wind generator with variable pitch blades
  49. Oil bath for wind turbine transmission
  50. Delco PMA testing with caps.